| PART |
Description |
Maker |
| BD7561G BD7561G09 BD7561SG BD7562F BD7562FVM BD756 |
OP-AMP, PDSO5
High Voltage Operation CMOS Operational Amplifiers:Input/Output Full Swing
|
Rohm
|
| BU7291SG-TR BU7294F-E2 BU7294SF-E2 BU7294SFV-E2 BU |
Input/Output Full Swing High Slew Rate Low Voltage CMOS Operational Amplifiers
|
Rohm
|
| LMR982FVM |
Input/Output Full Swing Low Power Operational Amplifiers
|
Rohm
|
| BU5265SHFV BU5265HFV-TR BU5265SHFV-TR |
Input Full Swing, Push-pull Output CMOS Comparators
|
Rohm
|
| BU7205HFV BU7205HFV-TR |
Low Power Input-Output Full Swing Operational Amplifier
|
ROHM
|
| BD12730G-TR |
Low Current Consumption Input/Output Full Swing Operational Amplifier
|
Rohm
|
| BU7250SG-TR BU7250G BU7253F BU7250G-TR BU7253SF BU |
Input Full Swing, Open Drain Output Low Supply Current CMOS Comparators
|
Rohm
|
| NJM2747V NJM2747 NJM2747D NJM2747M |
Single Supply Quad Operational Amplifier with Full Swing Output
|
NJRC[New Japan Radio]
|
| NJM2747 |
Single Supply Quad Operational Amplifier with Full Swing Output
From old datasheet system
|
New Japan Radio
|
| ISL3150E ISL3150EIBZ ISL3150EIUZ ISL3152E ISL3152E |
【16.5kV ESD (IEC61000-4-2) Protected, Large Output Swing, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
|
Intersil Corporation
|
| ISL3156EIBZ ISL3156EIUZ ISL3152EIUZ ISL3152EIBZ IS |
±16.5kV ESD (IEC61000-4-2) Protected, Large Output Swing, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers
|
Intersil Corporation
|
| WD101 WD105 WD200 WD102 WD506 WD100 WD103 WD104 WD |
DC/DC Converters
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage -15.0 VDC. Output current -500 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 20 mA(no load), 543 mA(full load).
DC/DC converter, 15 watts. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 5.0 VDC. Output current 3000 mA. Input current 20 mA(no load), 800 mA(full load).
DC/DC converter, 10 watts. Input voltage 18.0-36.0 VDC. Output voltage 12.0 VDC. Output current 1250 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage 15.0 VDC. Output current 1000 mA. Input current 20 mA(no load), 780 mA(full load).
DC/DC converter, 10 watts. UL1950 approvals. Input voltage 18.0-36.0 VDC. Output voltage -12.0 VDC. Output current -625 mA. Input current 30 mA(no load), 780 mA(full load).
|
List of Unclassifed Man...
International Power Sources
ETC[ETC]
List of Unclassifed Manufacturers
|
